Register once, drag and drop ECAD models into your CAD tool and speed up your design.
Click here for more information74AVC16373DGG
16-bit D-type transparent latch; 3.6 V tolerant; 3-state
The 74AVC16373 is a 16-bit D-type transparent latch featuring separate D-type inputs for each latch and 3-state outputs for bus oriented applications. One latch enable (LE) input and one output enable (OE) input are provided per 8-bit section. The 74AVC16373 consist of two sections of eight D-type transparent latches with 3-state true outputs.
The 74AVC16373 is designed to have an extremely fast propagation delay and a minimum amount of power consumption.
To ensure the high-impedance output state during power-up or power-down, pin nOE should be tied to VCC through a pull-up resistor (Live Insertion).
A dynamic controlled output (DCO) circuitry is implemented to support termination line drive during transient.
Features and benefits
Wide supply voltage range from 1.2 V to 3.6 V
Complies with JEDEC standards:
JESD8-7 (1.2 V to 1.95 V)
JESD8-5 (1.8 V to 2.7 V)
JESD8-1A (2.7 V to 3.6 V)
CMOS low power consumption
Input/output tolerant up to 3.6 V
Dynamic Controlled Output (DCO) circuit dynamically changes output impedance, resulting in noise reduction without speed degradation
Low inductance multiple VCC and GND pins to minimize noise and ground bounce
Supports Live Insertion
Applications
PCB Symbol, Footprint and 3D Model
Model Name | 描述 |
---|---|
|
封装
下表中的所有产品型号均已停产 。
型号 | 可订购的器件编号,(订购码(12NC)) | 状态 | 标示 | 封装 | 外形图 | 回流焊/波峰焊 | 包装 |
---|---|---|---|---|---|---|---|
74AVC16373DGG | 74AVC16373DGG,112 (935265483112) |
Obsolete | AVC16373 | no package information | |||
74AVC16373DGG,118 (935265483118) |
Obsolete | AVC16373 | |||||
74AVC16373DGG,512 (935265483512) |
Obsolete | AVC16373 | |||||
74AVC16373DGG,518 (935265483518) |
Obsolete | AVC16373 |
环境信息
下表中的所有产品型号均已停产 。
Series
文档 (2)
文件名称 | 标题 | 类型 | 日期 |
---|---|---|---|
74AVC16373 | 16-bit D-type transparent latch; 3.6 V tolerant; 3-state | Data sheet | 2018-02-20 |
AN90007 | Pin FMEA for AVC family | Application note | 2018-11-30 |
支持
如果您需要设计/技术支持,请告知我们并填写 应答表 我们会尽快回复您。
模型
No documents available
PCB Symbol, Footprint and 3D Model
Model Name | 描述 |
---|---|
|
How does it work?
The interactive datasheets are based on the Nexperia MOSFET precision electrothermal models. With our interactive datasheets you can simply specify your own conditions interactively. Start by changing the values of the conditions. You can do this by using the sliders in the condition fields. By dragging the sliders you will see how the MOSFET will perform at the new conditions set.