NG体育娱乐，ng体育平台

×

74AUP1G74-Q100

Low-power D-type flip-flop with set and reset; positive-edge trigger

The 74AUP1G74-Q100 is a single positive edge triggered D-type flip-flop with individual data (D), clock (CP), set (SD) and reset (RD) inputs, and complementary Q and Q outputs. Data at the D-input that meets the set-up and hold time requirements on the LOW-to-HIGH clock transition will be stored in the flip-flop and appear at the Q output.

Schmitt-trigger action at all inputs makes the circuit tolerant of slower input rise and fall times.

This device ensures very low static and dynamic power consumption across the entire VCC range from 0.8 V to 3.6 V.

This device is fully specified for partial power down applications using IOFF. The IOFF circuitry disables the output, preventing the potentially damaging backflow current through the device when it is powered down.

This product has been qualified to the Automotive Electronics Council (AEC) standard Q100 (Grade 1) and is suitable for use in automotive applications.

特性

  • Automotive product qualification in accordance with AEC-Q100 (Grade 1)

    • Specified from -40 °C to +85 °C and from -40 °C to +125 °C

  • Wide supply voltage range from 0.8 V to 3.6 V

  • CMOS low power dissipation

  • High noise immunity

  • Overvoltage tolerant inputs to 3.6 V

  • Low static power consumption; ICC = 0.9 μA (maximum)

  • Latch-up performance exceeds 100 mA per JESD 78 Class II

  • Low noise overshoot and undershoot < 10 % of VCC

  • IOFF circuitry provides partial Power-down mode operation

  • Complies with JEDEC standards:

    • JESD8-12 (0.8 V to 1.3 V)

    • JESD8-11 (0.9 V to 1.65 V)

    • JESD8-7 (1.2 V to 1.95 V)

    • JESD8-5 (1.8 V to 2.7 V)

    • JESD8C (2.7 V to 3.6 V)

  • ESD protection:

    • HBM: ANSI/ESDA/JEDEC JS-001 class 3A exceeds 5000 V

    • CDM: ANSI/ESDA/JEDEC JS-002 class C3 exceeds 1000 V

参数类型

Type numberProduct statusVCC (V)Logic switching levelsOutput drive capability (mA)tpd (ns)fmax (MHz)Power dissipation considerationsTamb (°C)Rth(j-a) (K/W)Ψth(j-top) (K/W)Rth(j-c) (K/W)Package name
74AUP1G74DC-Q100Production0.8 - 3.6CMOS± 1.99.2400ultra low-40~12520334.1113VSSOP8

封装

型号封装尺寸版本回流焊/波峰焊包装状态标示可订购的器件编号，（订购码(12NC)）
74AUP1G74DC-Q100
VSSOP8
(SOT765-1) 		SOT765-1SOT765-1_125Activep7474AUP1G74DC-Q100H
( 9353 066 05125 )

环境信息

型号可订购的器件编号化学成分RoHSRHF指示符无铅转换日期
74AUP1G74DC-Q10074AUP1G74DC-Q100H74AUP1G74DC-Q100Always Pb-free
品质及可靠性免责声明

文档 (7)

文件名称标题类型日期
74AUP1G74_Q100Low-power D-type flip-flop with set and reset; positive-edge triggerData sheet2023-07-14
AN10161PicoGate Logic footprintsApplication note2002-10-29
AN11052Pin FMEA for AUP familyApplication note2019-01-09
aup1g74aup1g74 IBIS modelIBIS model2013-04-07
Nexperia_document_leaflet_Logic_AUP_technology_portfolio_201904Nexperia_document_leaflet_Logic_AUP_technology_portfolio_201904Leaflet2019-04-12
Nexperia_Selection_guide_2023Nexperia Selection Guide 2023Selection guide2023-05-10
SOT765-1plastic, very thin shrink small outline package; 8 leads; 0.5 mm pitch; 2 mm x 2.3 mm x 1 mm bodyPackage information2022-06-03

支持

如果您需要设计/技术支持，请告知我们并填写 应答表, 我们会尽快回复您。

模型

文件名称标题类型日期
aup1g74aup1g74 IBIS modelIBIS model2013-04-07

订购、定价与供货

样品

安世半导体客户可通过我们的销售机构或直接通过在线样品商店订购样品： https://extranet.nexperia.com.

样品订单通常需要2-4天寄送时间。

如果您尚未取得安世半导体的直接采购帐号，我们的全球与区域经销网络可以协助您取得样品

NG体育娱乐，ng体育平台