NG体育娱乐，ng体育平台

×

NCA9306-Q100

2-bit bidirectional multi-voltage level translator; open-drain; push-pull

The NCA9306-Q100 is a 2 channel bidirectional I²C and SMBus multi-voltage level translator with an enable (EN) pin input. It allows voltage translation between 0.95 V and 5 V without the use of a direction pin. It supports up to 100 MHz up translation and >100 MHz down translation at ≤ 30 pF capacitive load. There is no need for a direction pin which minimizes the system effort. The NCA9306-Q100 supports 5 V tolerant I/O pins to support mixed mode signal operation. The ability to set up different voltage translation levels on each channel makes the device very flexible and suitable for a lot of different applications.

The low ON-state resistance RON of the switch allows connections to be made with minimal propagation delay. When EN is HIGH, the translator switch is on, and the SCLA and SDAA I/O are connected to the SCLB and SDAB I/O respectively, allowing bidirectional data flow between ports. When EN is LOW, the translator switch is off, and a high-impedance state exists between ports. As with the standard I²C bus-system, pull-up resistors are required to provide the logic HIGH levels on the translators bus. The NCA9306-Q100 has a standard open-drain configuration of the I²C-bus. The size of these pull-up resistors depend on the system. Each side of the translator must have a pull-up resistors. NCA9306-Q100 is designed to work with Standard-mode, Fast-mode and Fast-mode plus I²C bus devices in addition to the SMBus devices.

When the SDAA or SDAB pin is LOW, the clamp is in the ON-state and a low resistance connections exists between the SDAA and SDAB ports. Assuming the higher voltage is on the SDAB port when the SDAB port is HIGH, the voltage on the SDAA port is limited to the voltage set by refA. When the SDAA port is HIGH, the SDAB port is pulled to the refB supply voltage by the pull-up resistors. The SCLA or SCLB pins also follows the same behavior as described for SDAA or SDAB pins.

This product has been qualified to the Automotive Electronics Council (AEC) standard Q100 (Grade 1) and is suitable for use in automotive applications.

特性

  • Automotive product qualification in accordance with AEC-Q100 (Grade 1)

    • Specified from -40 °C to +125 °C

  • 2-channel bidirectional voltage translator for SDA and SCL lines in mixed mode I²C bus applications

  • Open-drain I²C-bus I/O ports (SCLA, SDAA, SCLB and SDAB)

  • Provides bidirectional voltage translation with no direction pin

  • High-impedance SCLA, SDAA, SCLB and SDAB for EN = LOW

  • Up translation

    • < 100 MHz; CL = 30 pF

    • < 40 MHz; CL = 50 pF

  • Down translation

    • > 100 MHz; CL = 30 pF

    • < 40 MHz; CL = 50 pF

  • Hot insertion

  • Bidirectional voltage level translation between:

    • 0.95 V and 1.8 V, 2.5 V, 3.3 V and 5.0 V

    • 1.2 V and 1.8 V, 2.5 V, 3.3 V and 5.0 V

    • 1.8 V and 2.5 V, 3.3 V and 5.0 V

    • 2.5 V and 3.3 V and 5.0 V

    • 3.3 V and 5.0 V

  • Low standby current

  • 5 V tolerant I²C-bus I/O pins to support mixed mode signal operation

  • Low RON provides less signal distortion

  • Latch-up performance exceeds 100 mA per JESD78 class II level A

  • ESD protection:

    • HBM ANSI/ESDA/JEDEC JS-001 Class 2 exceeds 2000 V

    • CDM ANSI/ESDA/JEDEC JS-002 Class C3 exceeds 1000 V

目标应用

  • GPIO, MDIO, PMBus, SMBus, SDIO, UART, I²C, and other interfaces in Telecom infrastructure

  • Industrial

  • Personal computing

  • Router and Industrial Automation

参数类型

Type numberProduct statusVCC(A) (V)VCC(B) (V)Logic switching levelsOutput drive capability (mA)tpd (ns)Nr of bitsPower dissipation considerationsTamb (°C)Rth(j-a) (K/W)Ψth(j-top) (K/W)Rth(j-c) (K/W)Package name
NCA9306DC-Q100Production0.95 - 5.00.95 - 5.0CMOSn.a.0.42low-40~12520636.1117VSSOP8

封装

型号封装尺寸版本回流焊/波峰焊包装状态标示可订购的器件编号，（订购码(12NC)）
NCA9306DC-Q100
VSSOP8
(SOT765-1) 		SOT765-1SOT765-1_125Activeh9NCA9306DC-Q100H
( 9356 912 82125 )

环境信息

型号可订购的器件编号化学成分RoHSRHF指示符无铅转换日期
NCA9306DC-Q100NCA9306DC-Q100HNCA9306DC-Q100
品质及可靠性免责声明

文档 (2)

文件名称标题类型日期
NCA9306_Q1002-bit bidirectional multi-voltage level translator; open-drain; push-pullData sheet2022-02-11
SOT765-1plastic, very thin shrink small outline package; 8 leads; 0.5 mm pitch; 2 mm x 2.3 mm x 1 mm bodyPackage information2022-06-03

支持

如果您需要设计/技术支持，请告知我们并填写 应答表, 我们会尽快回复您。

订购、定价与供货

样品

安世半导体客户可通过我们的销售机构或直接通过在线样品商店订购样品： https://extranet.nexperia.com.

样品订单通常需要2-4天寄送时间。

如果您尚未取得安世半导体的直接采购帐号，我们的全球与区域经销网络可以协助您取得样品

NG体育娱乐，ng体育平台